Hioki FT3405, Инструкция по эксплуатации

Страница: 24 / 50

Chapter 2 Preparing for Measurement
20
To perform contact measurement, attach the Z5003 Contact
Adapter.
The instrument can be mounted on a commercially available tri-
pod to perform measurements from an installed (fixed) position.
Mount the instrument on the tripod using the tripod screw hole
on the bottom of the device.
Connecting the Contact Adapter (Option)
1. Connect the Contact Adapter as shown
in the diagram to the right.
2. Tighten the fixing screw on the bottom of
the instrument.
3. Attach the 9032 Metal Contact Tip, 9033
Rubber Contact Tip, and 9212 Periph-
eral Ring as needed for your application.
Connecting the Instrument to a Tripod
1
2
• Do not attempt to rotate the instrument to tighten
the screw when mounting it on a tripod. Instead,
rotate the screw.
• Do not lift or carry the instrument while it is
mounted on a tripod.
*Screw size: 1/4 inch