Hioki DT4251, Инструкция по эксплуатации

Страница: 63 / 106

57
4
Using Instrument Conveniently
4.1 Selecting the Measurement Range
Auto or Manual range can be selected. In the case of measurement
where the desired range can be selected, [RANGE:] lights up at the
bottom of the display.
• Auto range Sets the optimum range automatically in
accordance with the actual measurement.
• Manual range Sets the speci fi c range manually.
(When the relative value (REL) function is enabled, the
range cannot be changed.)
Measuring with the auto range
[RANGE: AUTO] lights up.
When the measurement function is switched using the rotary
switch, the auto range is enabled.
Measuring with the manual range
Press .
[RANGE: MANUAL] lights up.
Each time is pressed, a higher range is
speci fi ed. When the key is pressed at the highest
range, the lowest range is speci fi ed once again.
Example: When the range is 6.000 V to 1000 V
6.000 V
→
60.00 V
→
600.0 V
→
1000 V
→
6.000 V
To switch from the manual range to the auto range, press
for at least 1 second.