Hioki CM4371-50 Скачать руководство пользователя страница 31

Страница: 31 / 124

Use of Test Leads

2.3

Use of Test Leads

The L9300 Test Lead (accessory) or the L9207-10 Test Lead (optional) is used for measurement.

Depending on measurement locations, use Hioki’s optional measurement cables.

See “Options” (p. 8)

WARNING

When using the instrument, use the test leads and options

specified by Hioki.

Using test leads and options other than those specified could cause bodily injury

or short circuit accidents.

When measuring the power line voltage, use test leads that

satisfy the following conditions.

•

IEC 61010 or EN 61010 safety standard-compliant

• Rated for measurement category III or IV

•

With the rated voltage higher than voltage being measured

Failure to do so could cause the operator to experience an electric shock.

The optional test leads for this instrument comply with the EN 61010 safety

standard. Observe the measurement category and rated voltage indicated on the

test leads during use.

HIOKI CM4371C961-00

Содержание CM4371-50





























































































































Результаты поиска

Содержание CM4371-50

Отзывы:

Похожие инструкции для CM4371-50

Бренды по названию

Популярные бренды

Hioki CM4371-50, Инструкция по эксплуатации

Результаты поиска

Содержание CM4371-50

Отзывы:

Похожие инструкции для CM4371-50

Бренды по названию

Популярные бренды