Hioki CM4002, Инструкция по эксплуатации

Страница: 54 / 104

46
Max., Min., Average, and Peak Values (MAX/MIN)
2.4 Max., Min., Average, and Peak Values (MAX/MIN)
The maximum, minimum, average, highest peak, or lowest peak values of the measured data
can be displayed. The auto-power save function is disabled. (p. 55)
3 3
1 1
Clamp the instrument around the object under measurement.
2 2
If you switch over to MAX or MIN mode while using the auto-range,
the range is fixed at the presently set range.
MAX MIN AVG PEAK MAX PEAK MIN
4 4
Freezes the
readouts.
PEAK MAX
PEAK MIN
MAX
Display refresh
interval
Waveform
Measured
value
(RMS value)
MIN
Main readout:
Maximum, minimum, average, highest
peak value, or lowest peak value
Sub-readout:
Present measured value
The instrument measures the RMS
value.
“AVG” means the average value of all
measured values.
Setting the range. (p. 20)
Press the MAX/MIN key to enter MAX/MIN mode and
switch the display.
Cancel
Hold down the key
for 1 s or longer.
1 s
HIOKI CM4002A961-02