Hioki CM4002 Скачать руководство пользователя страница 14

Страница: 14 / 104

Notations

Notations

Safety notations

In this document, the severity levels of risk and hazard are classified as follows.

DANGER

Indicates an imminently

hazardous situation that,

if not avoided, will result in

death or serious injury.

Indicates a high-voltage

hazard. Failure to verify

safety or improper handling

of the instrument could lead

to an electric shock, burn, or

death.

WARNING

Indicates a potentially

hazardous situation that, if

not avoided, could result in

death or serious injury.

IMPORTANT

Indicates information or

content that is particularly

important from the stand

point of operating or

maintaining the instrument.

CAUTION

Indicates a potentially

hazardous situation that, if

not avoided, could result in

minor or moderate injury.

Indicates an action that must

not be performed.

NOTICE

Indicates potential risks of

damage to the supported

product (or to other property).

Indicates an action that must

be performed.

HIOKI CM4002A961-02

Содержание CM4002









































































































Результаты поиска

Содержание CM4002

Отзывы:

Похожие инструкции для CM4002

Бренды по названию

Популярные бренды

Hioki CM4002, Инструкция по эксплуатации

Результаты поиска

Содержание CM4002

Отзывы:

Похожие инструкции для CM4002

Бренды по названию

Популярные бренды