Hioki BT5525, Инструкция по эксплуатации, Страница: 139 / 215

139
Communications Command Reference
Querying the voltage monitor value
Syntax
Query
:MEASure:MONItor?
Response
(3 bytes +
CRLF)
<Voltage monitor value>
• Voltage monitor value {25 to 500}
Returns the voltage monitor value.
Description Queries the voltage monitor value.
Example
:MEASure:MONItor?
␣
35
The voltage monitor value is 35 V.
Clearing the measured value
Syntax Command
:MEASure:CLEar
Description Clears the measured value and judgment result. The judgment is determined to be no
judgment.
Example
:MEASure:CLEar
Clears the measured value and judgment result.
Querying the number of measured values saved in the memory
Syntax Query
:MEASure:COUNt?
Response
(3 bytes +
CRLF)
<Number of measured values in the memory>
• Number of measured values saved in the memory {0 to 999}
Returns the number of measured values saved in the memory.
Description Queries the number of measured values saved in the memory.
As the test starts, the memory is cleared once and then the measured values are saved in
the internal memory for each sampling. Up to 999 measured values can be saved in the
memory and any measured values from samplings taking place after that are not saved.
By querying the number of measured values saved in the memory, you can find out the
number of measured values returned with the
:MEASure:MEMory?
query.
Example
:MEASure:COUNt?
␣
23
23 measured values are saved in the memory.
Querying the measured values saved in the memory
Syntax Query
:MEASure:MEMory? [CRLF]
Response
<Measured value 1>,<Measured value 2>,<Measured
value 3>,

<Measured value N>
Description Queries all the measured values saved in the memory.
The measured values are returned with comma delimiters. When
CRLF
is specified as an
option, they are returned with line break (
CRLF
) delimiters.
The number of measured values (N), can be checked with the
:MEASure:COUNt?
query.
The response description is specified by
:MEASure:VALid
(Setting the response details
of measured values).
See the
:MEASure?
query for the measured value response format.
An execution error occurs if the measured values are not saved in the memory.
Example
:MEASure:MEMory?
120.0E+06,123.4E+06,124.5E+06,130.9E+06,150.0E+06
Five measured values are saved in the memory and the respective resistance values are
120.0 M
Ω
, 123.4 M
Ω
, 124.5 M
Ω
, 130.9 M
Ω
, and 150.0 M
Ω
.
Communications Function
HIOKI BT5525A961-00