Hioki BT5525 Скачать руководство пользователя страница 100 | Manualshive

Страница: 100 / 215

Hioki BT5525 Скачать руководство пользователя страница 100

100

Interface Overview and Features

8.1 Interface Overview and Features

The instrument can be controlled using the RS-232C interface, LAN interface, or USB interface.
It is not necessary to set which interface to use. However, use a single interface to control the
instrument to avoid malfunction.
For the specifications, see “Interface specifications” (p. 186).
After the power is turned on, the Measurement screen is displayed. Wait for approximately

3 seconds to send a communications command.

For communications command and query notations, see “8.9 Communications Command
Reference” (p. 130).

Remote state and local state

The instrument is in the remote state during communications and

[RMT]

is displayed on the

Measurement screen. Any operation keys except for the

MENU

key and

STOP

key become

disabled.

[LOCAL]

Cancels the remote state and returns to the local state.

Stops measurement.

Pressing the

MENU

key cancels the remote state and enables the key operations.

HIOKI BT5525A961-00

«
...
98
99
100
101
102
...
»

Содержание BT5525
























































































































































































































Отзывы:

Нет отзывов