manualshive.com logo in svg

Hioki Analog MO HiTESTER IR4011, Инструкция по эксплуатации, Страница: 64 / 104

Поделиться
Скачать
Hioki Analog MO HiTESTER IR4011 Скачать руководство пользователя страница 64

  Safety Information

4

This manual contains information and warnings essential for
safe operation of the instrument and for maintaining it in safe
operating condition. Before using it, be sure to carefully read the
following safety precautions.

Safety Information

This instrument is designed to comply with IEC 61010
Safety Standards, and has been thoroughly tested for
safety prior to shipment. However, mishandling during
use could result in injury or death, as well as damage to
the instrument. Using the instrument in a way not
described in this manual may negate the provided safety
features. Be certain that you understand the instructions
and precautions in the manual before use. We disclaim
any responsibility for accidents or injuries not resulting
directly from instrument defects.

Safety Symbols

In the manual, the 

symbol indicates particularly important informa-

tion that the user should read before using the instrument.

The 

 symbol printed on the instrument indicates that the user should 

refer to a corresponding topic in the manual (marked with the  

 sym-

bol) before using the relevant function.

Indicates a double-insulated device.

Indicates DC (Direct Current).

Indicates AC (Alternating Current).

Indicates that dangerous voltage may be present at this terminal.

Содержание Analog MO HiTESTER IR4011









































































































Отзывы:

Нет отзывов