Hioki 9625, Инструкция по эксплуатации

Страница: 16 / 72

10
2.2 Installing and Uninstalling the Software
HIOKI
Installation
Use the following procedure to install the software.
1.
Set up the computer.
Shut down all currently running applications.
2.
Insert the supplied CD disc into the CD-ROM drive.
3.
Double-click the setup file (setup.exe) on the CD.
Supposing the drive letter for the CD-ROM drive is R (if another letter,
substitute before the colon) then in the Windows
Start menu, select
Run , and enter R:\english\setup.exe , then click OK.
4.
The 9625 installer start: follow the directions on the screen to
complete the installation.
Uninstallation
Use the following procedure to uninstall the software.
1.
In the Windows
Start
menu, select
Settings
, and
Control Panel
.
2.
Click the
Add/Remove
Programs icon, to display the
Add/
Remove Programs Properties
dialog.
3.
In the
Install/Uninstall
tab of the dialog, click on
9625 POWER
MEASUREMENT SUPPORT SOFTWARE
in the list of applications,
and click
Add/Remove
.
This runs the uninstaller, which removes the 9625 software.
2.2 Installing and Uninstalling the Software
• When installing, if other application are running it may not be possible to
complete the installation. As far as possible, close all other applications
before beginning the installation. In particular, if any anti-virus software is
running, it may prevent the installation, even though it is not a virus. In
this case, make the appropriate settings in the anti-virus software to allow
the installation to proceed.
• Following installation, the computer may need to be restarted.