Hioki 9279, Инструкция по эксплуатации

Страница: 36 / 54

6
__________________________________________________
_____________________________________________
CAUTION
Note that the product may be damaged if current
exceeding the selected measurement range is
applied for a long time
Do not store or use the product where it could be
exposed to direct sunlight, high temperature or
humidity, or condensation. Under such conditions,
the product may be damaged and insulation may
deteriorate so that it no longer meets specifications.
To avoid damage to the product, protect it from
vibration or shock during transport and handling,
and be especially careful to avoid dropping.
Measurements are degraded by dirt on the mating
surfaces of the clamp-on sensor, so keep the
surfaces clean by gently wiping with a soft cloth.
Avoid stepping on or pinching the cable, which
could damage the cable insulation.
Keep the cables well away from heat sources, as
bare conductors could be exposed if the insulation
melts.
To avoid damaging the cables, do not bend or pull
the cables.
This product should be installed and operated
indoors only, between 0 and 40 . However, it can
be safely operated down to -10 .
When measuring the high-frequency large current,
over-heating of the core may occur. Note that the
input never exceed the maximum permissible input
range. See the figures in Chapter 3,"Specifications".