Hioki 8910 Скачать руководство пользователя страница 93

Страница: 93 / 150

8.3 In Case of Errors

Error Display

Indication

Check items

Indicates that the 8910
was not found during
data transfer.

• Are all cables properly connected?
• Are the communication settings

correct?

• Is there no cable connected to the

CAN1 or CAN2 port on the 8910?

Indicates that the 8910
was found, but
communication operation
failed.

• Is the [

ONLINE/OFFLINE

] switch

positioned to [

ONLINE

] side?

Indicates that the
message ID trigger
setting is incomplete.

If the message ID trigger setting is
turned ON (with the [

ID_TRIGGER

]

check box selected),
• Is a trigger ID set (ID no. in [

M_ID

]

input box)?

• Is a logic channel set for signal

output?

If an error occurs, the 8910 may remain in Remote mode (with the ONLINE
LED lit in orange). In this case, retransmit the data to exit Remote mode.

Содержание 8910























































































































































Результаты поиска

Содержание 8910

Отзывы:

Hioki 8910, Инструкция по эксплуатации, Страница: 93 / 150

Результаты поиска

Содержание 8910

Отзывы: