Hioki 8910, Инструкция по эксплуатации, Страница: 80 / 150

7.1 Registration List Operations
72
7.1.2 Creating a registration list (registering definition
data to a registration list)
• To create a new registration list, a definition data list must be read
from a stored CAN definition data list file.
• Then necessary data must be selected from the downloaded
definition data and registered in the registration list for data transfer
to the 8910.
❖
If there is no CAN definition data file, create a file.
→
(Chapter 6, 49p.).
Selecting [ New ] on the [ File ] pull-down menu or clicking the following
icon on the toolbar deletes and initializes the contents of the 8910
registration list and analog/logic output allocation list. When the
registered contents already exist, a confirmation dialog box appears
prior to deletion.
Clicking the [ New ] button located above the 8910 registration list
produces the same result.
Click the [ ... ] button located to the right of the CAN definition data file
name box to show the file loading dialog box.
From the list of CAN definition data files shown in the file loading
dialog box, select a file (with extension "cdf") to read.
Clicking the [ Start ] button on the dialog box updates the CAN
definition data list.
1
Creating a new document.
1
Select [File] - [New] or click the icon .
2
Downloading a CAN definition data file
1
Click [...] button.
2
Select a file.
3
Click the [Start] button.