Hioki 8910, Инструкция по эксплуатации

Страница: 61 / 150

53
6.2 Editing the CAN Definition Data
6.2.1 Setting the message ID
• Set the message ID of the message in which data to be acquired is
stored.
• Since this instrument supports extended format, a value of up to 29
bits can be set in the message ID section. Enter numeric values in
hexadecimal notation.
6.2.2 Setting the data length
Enter the size (bits) of data to be acquired.
• Since the maximum size of data that can be captured by the 8910 is
2 bytes (16 bits), a value from 1 to 16 can be entered in the input
box.
• The data length set here, together with the data start position and
data pattern system settings, determines the location of acquisition
data in the CAN data frame.
ID
0 to 1FFFFFFF
Example : When 64 is entered in the input box, this input is
interpreted as 100 in decimal notation since 64 in
hexadecimal notation is 100.
Length [bit]
1 to 16 (bits)