Hioki 8910, Инструкция по эксплуатации

Страница: 20 / 150

1.2 Major Features
12
1. Compact size and lightweight
The main unit is compact and lightweight for easy portability.
2. Ample output channels
The 8910 is equipped with ample output channels - 12 channels for
analog signal output and 24 bits for logic signal output.
3. Two independent input ports
Since CAN1 and CAN2 are independent, two networks with different
baud rates can be connected.
4. Automatic baud rate setting
Because the 8910 monitors the CAN bus and automatically sets the
baud rate, there is no need to manually set the baud rate. (Supported
baud rates are 125 kbps, 250 kbps, 500 kbps, and 1 Mbps.)
5. Detailed settings using a PC
Easy-to-use PC application software enables the detailed settings of
data to be acquired from a CAN bus.
6. Observation with your existing recorder
The output signal level ranges from -5 to +5 V, and the value is held
until subsequent signal output. Therefore, output from the 8910 can be
connected to an ordinary recorder. Thus, you can observe CAN
signals by connecting the 8910 to your existing recorder.
7. Real-time output
CAN signals are converted into analog/logic signals and output in real
time.
8. Mixed recording
By using the 8910 with a recorder such as the Memory HiCorder,
"sensor data or control signal on CAN" and "signal that cannot be
acquired on CAN" can be recorded together.
1.2 Major Features