Hioki 8910, Инструкция по эксплуатации

Страница: 101 / 150

93
9.4 Password Setting
• The password protection function can be activated, requiring the set
password to be entered for opening a CAN definition data file.
• This function effectively prevents the inadvertent editing of data.
To set a password, select [ Modify Password ] on the [ Edit ] pull-down
menu to open the [ Modify Password ] dialog box.
To enable password setting, select the [ Need Password ] check box in
the dialog box, enter a password in the [ Password ] input box.
Click [ OK ].
The password must consist of only alphanumeric characters. After this
setting is entered, the password must be entered to open a CAN
definition data file.
<To disable the password protection function>
Deselect the check box.
• There will be no need to enter the password to open a CAN
definition data file after entering the setting.
• The password protection function is disabled in default installation
status, with no password required. There is no password protection
until a password is set.
9.4 Password Setting
1
Select [Edit] - [Modify Password].
2
Select the [Need Password] check box, and
enter a password.
3
Click [OK].
A password can only be set when the program is in CAN definition data
editing mode.