Hioki 8860-50 Скачать руководство пользователя

Страница: 132 / 490

5.2 Adding Comments

120

Comment Entry Example ________________________________________

The virtual keyboard is used to enter comments with the operating keys or a
mouse.

See

"Using [Edit] for Entry" (p. 67)

In this example, we enter the comment “LINE-1” in the Comments field on
the

[One Ch]

page.

Use the

CURSOR

keys to move the cursor to the Comments field, and press the

[Edit]

key.

The virtual keyboard appears.

Use the

CURSOR

keys to move the cursor to “L”, and press the

[Set]

key.

The letter “L” appears in the entry field.

Continue entering the same way.

• To change character sets, press the

[Character set]

key to switch the entry

mode (Virtual Keyboard Entry Modes) (p. 68)).

• To insert a character between existing characters: Use the

and

keys to

move the cursor to the entry point, and enter a character as in Step 2.

• To delete a character: Use the

and

keys to move the cursor (underline)

to the character following the one you want to delete in the entry field, and
press the

[BS]

(Backspace) key.

• To delete all entered characters: Press the

[Clear]

key.

When finished entering, press the

[OK]

or the

ENTER

key.

The characters are accepted and the virtual keyboard is closed.
To revert to the previous field contents, press the

[Cancel]

key.

Comments Field

LINE

Содержание 8860-50











































































































































































































































































































































































































































































































Результаты поиска

Содержание 8860-50

Отзывы:

Похожие инструкции для 8860-50

Бренды по названию

Популярные бренды

Hioki 8860-50, Инструкция по эксплуатации

Результаты поиска

Содержание 8860-50

Отзывы:

Похожие инструкции для 8860-50

Бренды по названию

Популярные бренды