Hioki 8860-50 Скачать руководство пользователя

Страница: 123 / 490

4.3 Acquiring Waveforms Using the Utility Functions

111

Chapte

r 4

asuremen

t Co

nfiguration Sett

ings

Memory Division: Display Settings

To open the screen: Press the

SET

key



Select

with

the

SUB MENU

keys



Mem Div Settings screen

See

Screen Layout (p. 37), To set from the Waveform screen

(p. 220)

Operating Key

Procedure

To display any block on the Waveform screen

Set the display blocks

(This can also be set on the Waveform screen.(p. 220))

CURSOR

Move the cursor to the

[Display Block].

F1 to F8

Set the number of blocks to display on the Wave-
form screen after measurement.

To display multiple blocks as overlaid waveforms

Enable the Reference Block function

CURSOR

Move the cursor to the

[Ref Block].

Select

[On]

(When Reference Blocks are enabled [On])

Select whether to reference every block

CURSOR

Move the cursor to the row number of the Refer-
ence Block to select its block number.

Enables (On) or disabled (Off) Reference Blocks.
When enabled, the frame of the selected block is
red.

F1 to F8

To overlay all waveforms, select the [All On] but-
ton.

To display every block as its waveform is acquired

Enable the Trace Waveform display

CURSOR

Move the cursor to the

[Wave Display].

Select

[On]

Viewing Memory Division waveforms on the Waveform screen

See

"8.12 Viewing Waveforms in Every Display Block (Memory Division)"
(p. 220)

Off

Reference Blocks are not displayed
(default setting)

Reference Blocks overlay Display blocks
on the display.

All Off

Disables all block references.

All On

Enables all block references.

Off

The waveform of the specified Display
Block is displayed after recording the
specified number of Used Blocks.
(default setting)

Waveforms are displayed one block at a
time as they are acquired at each trigger
event.

Display Block (Green)

Reference Block (Red)

Measurement data is recorded at the
colored positions.

When the Display Block is 5 and the
Reference Block is 3

Reference Block No.

Enabling the Trace Waveform display
lengthens dead time.

About Dead Time:

See: "Difference Between Dead Times

During Normal and Memory Division
Recording" (p. 112)

When Using Auto Save

When disabled, displayed images are not
saved.

Even if the Roll Mode is enabled (other
than Off), it is not usable when the Trace
Waveform display is disabled.

Reference Block Selection

Reference Blocks can also be selected
and deselected in the [Reference Block]
item on the [List] display.

See: "Getting Details on Each Block" (p.

112)

Содержание 8860-50











































































































































































































































































































































































































































































































Результаты поиска

Содержание 8860-50

Отзывы:

Похожие инструкции для 8860-50

Бренды по названию

Популярные бренды

Hioki 8860-50, Инструкция по эксплуатации

Результаты поиска

Содержание 8860-50

Отзывы:

Похожие инструкции для 8860-50

Бренды по названию

Популярные бренды