Hioki 8205-10, Инструкция по эксплуатации

Страница: 19 / 62

7
_____________________________________________________________________
Product Overview
______________________________________________________________
Recording
Waveform
Trademark
Model
Scale
Setup Range Data 1
Elapsed Time Display
Printing Waveform
Setup Range Data 2 Interval Printing
Setup Range Data 1 The print setup signal type, numeric value of the
range and display units are printed once when the
CHART
button is pushed (ON).
Model Prints when the
CHART
button is pushed (ON)
Trademark Prints when the
CHART
button is pushed (ON)
Scale Prints when the
CHART
button is pushed (ON)
Elapsed Time Display Prints at 5-division intervals
Setup Range Data 2 Prints at 10-division intervals, and when the range
setting or position control is changed.
Interval Printing
(numeric amplitude) The input signal amplitude is printed numerically at
specific intervals. If the measurable range is widely
over range, the following indications will appear.
DC mode
OVER(+): Indicates the amplitude is over range (positive side).
OVER(-): Indicates the amplitude is over range (negative side).
AC, Current mode
OVER(+): Indicates the amplitude is over range.
Printing Waveform Prints when the average mode is selected.
Unaverage mode: DC, Average mode: DC
ADJ Data See Section 2.7, Item 9 regarding ADJ button
1.5 Printout Information
Example of DC-5 V range case