manualshive.com logo in svg

Hioki 2300 Smart Site, Инструкция по эксплуатации, Страница: 17 / 366

Поделиться
Скачать
Hioki 2300 Smart Site Скачать руководство пользователя страница 17

4

Notes on Use

Notes on Use

Follow these precautions to ensure safe operation and to obtain
the full benefits of the various functions.

Instrument Installation

Operating temperature and humidity: 0 to 50°C (32 to 122°F), 80%
RH (non-condensating)

Avoid the following locations that could cause an accident or dam-
age to the instrument.

Exposed to direct 
sunlight
Exposed to high
temperature

In the presence of
corrosive or explosive 
gases

Exposed to liquids
Exposed to
high humidity or con-
densation

Exposed to strong
electromagnetic fields
Near electromagnetic
radiators

Exposed to high levels 
of particulate dust

When the module is used in 
a dusty environment, place it 
in a dustproof case and take 
measures to ensure heat 
dissipation.

Subject to vibration

Do not allow the instrument to get wet, and do not take measure-
ments with wet hands. 
The instrument may be damaged.

To avoid damage to the instrument, protect it from physical shock
when transporting and handling. 
Be especially careful to avoid physical shock from dropping.

Do not obstruct the ventilation holes.
Ventilation holes for heat radiation are provided on the top and rear
panels of the instrument. Leave sufficient space around the ventilation
holes and install the instrument with the holes unobstructed. Installation
of the instrument with the ventilation holes obstructed may cause a
malfunction or fire.

When using the instrument in the case, drill ventilation holes.
Drill ventilation holes or install a ventilation fan to prevent heat buildup.

Содержание 2300 Smart Site















































































































































































































































































































































































Отзывы:

Нет отзывов