Hioki 2300 Smart Site Скачать руководство пользователя страница 146

Страница: 146 / 366

8 2321-20 WAVEFORM MODULE

133

APPX

IDX

8.1.5 Accessory and Option

Accessories

None

Option

9320-01 LOGIC

PROBE

MR9321-01 LOGIC PROBE
9765

CLAMP ON SENSOR (For CT secondary side)

9695-02

CLAMP ON SENSOR

9695-03

CLAMP ON SENSOR

9661-01

CLAMP ON SENSOR

9238-01

CLAMP SENSOR CABLE

Setting the Module ID

You can connect up to 63 measurement modules to one communi-
cations module.

Setting Procedure

Use the module ID setting dial to set the ID No. of the module to a
number from 01 and to 63. (You cannot set a number other than
the above.)

8.2 Settings

• Ensure that the set ID is not used for any other module con-

nected to the same communications module.

• The ID numbers of modules need not be consecutive.
• Setting the ID to 99, then turning on the power resets all inter-

nal settings to the defaults.

• The module ID and COM ID are not related and can be set

independently.

Содержание 2300 Smart Site















































































































































































































































































































































































Результаты поиска

Содержание 2300 Smart Site

Отзывы:

Hioki 2300 Smart Site, Инструкция по эксплуатации, Страница: 146 / 366

Результаты поиска

Содержание 2300 Smart Site

Отзывы: