manualshive.com logo in svg

HindlePower ATevo Series, Операции

Поделиться
Скачать
HindlePower ATevo Series Скачать руководство пользователя страница 63

6.4.

6.4. Configuring System Settings

Configuring System Settings

This section details configuration of the ATevo system parameters, including date, time, and
LCD controls (brightness, contrast, etc.).

To enter System Settings mode, select MENU > SYSTEM SETTINGS. ATevo will display a
scrollable page of parameters.

To change a parameter, do the following:

• Navigate using UP and DOWN, and select it with EDIT/ENTER.
• Press LEFT and RIGHT to navigate to the digit to be modified
• Press UP and DOWN to change setting value.
• Once desired setting is displayed, press EDIT/ENTER to store it.

Clicking on each parameter below will reveal a screenshot of how the parameter is changed:

T

Time

ime

MENU > SYSTEM SETTINGS > ‘Time’

ATevo uses a 24-hour clock (e.g. 2:30 PM is 14:30)

*

HindlePower Inc

ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en

Copyright HindlePower Inc. 2021

Page 61 of 171

Содержание ATevo Series














































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды