manualshive.com logo in svg

HindlePower ATevo Series, Операции

Поделиться
Скачать
HindlePower ATevo Series Скачать руководство пользователя страница 40

Last modified: 9 February 2021

4.9.

4.9. Wiring Relays on Auxiliary I/O

Wiring Relays on Auxiliary I/O

Board

Board

When provided, the optional Auxiliary Alarm I/O Board (A4) is mounted to the heat sink, above
the Power Board (A2) on the left side of the ATevo.

See

Section 14, Auxiliary Inputs/Outputs

for more information and wiring instructions.

Last modified: 5 March 2021

4.10.

4.10. Wiring Temperature

Wiring Temperature

Compensation Probe

Compensation Probe

The battery temperature compensation, or ‘TempCo’, probe (A10) contains a temperature-
dependent resistor in an epoxy module. When used, this probe is installed on the battery.

See

Section 12, Battery Temperature Compensation

for more information and wiring

instructions.

Last modified: 5 March 2021

4.11.

4.11. Wiring Communications Adapters

Wiring Communications Adapters

Wiring Serial Communications Adapters

Wiring Serial Communications Adapters

ATevo will support up to three (3) optional Serial Communications Adapter pc boards. They
mount on the ATevo’s front panel door, by plugging directly into the Main Control Board (A1) via
connection points P10, P11, and P12.

Refer to the supplementary ATevo Communications Manual

JA0102-54

for more information and

wiring instructions.

Wiring Ethernet Adapter Board

Wiring Ethernet Adapter Board

ATevo will support an optional Ethernet Adapter Board (A22). It mounts on the ATevo’s front
panel door, by plugging directly into the Main Control Board (A1) via connection point P13.

Refer to the supplementary ATevo Communications Manual

JA0102-54

for more information and

wiring instructions.

Last modified: 23 February 2022

HindlePower Inc

ATevo Operations–Single Phase Input–Group II (30-100 Adc Output) - 1_en

Copyright HindlePower Inc. 2021

Page 38 of 171

Содержание ATevo Series














































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды