HIMS Inc.
BookSense XT – User Manual
Note: XX shows the remaining time of sleep timer. If sleep timer is “0”, BookSense says
“off.”
4) Press the OK or MENU button.
To cancel setting the sleep timer, press the CANCEL button in step 3 before entering the
number. Or press the CANCEL button instead of the OK button in step 4; to delete all
numbers you have entered, press the CANCEL button until you have deleted all numbers.
After all numbers have been deleted, you will hear a ding. Then, press the CANCEL again to
close the edit box. Note that the CANCEL button acts as a backspace key and you cannot
cancel out of an edit box until you delete all numbers.
Note: If you enter “0” in step 3, the sleep timer will not work. You can also press number 4
button for more than 2 seconds to set the sleep timer. This allows you to set on the fly
without using the menu.
Note: Once the sleep timer is set, even if the device is active, it will shut off. If the device is
not active but still on, the power save mode setting will have first priority. That means if you
set 30 minutes for the sleep timer and set 5 minutes for the power save mode setting, the
device is turned off after 5 minutes.
Note: The difference between the sleep timer and the power saving setting is that the sleep
timer will turn the unit off at a specified time regardless of what you are doing. The power
save mode setting will only turn off the unit if the BookSense XT is not playing a file or not
being used.
9.8 Power save mode settings
When the device is turned on but is not in use, it can be turned off automatically to preserve
the battery life. To set the power saving time, follow these steps:
1) Press the MENU button. Press the UP or DOWN button to move to the “Global options,
pull down.”
2) Press the RIGHT, OK, or MENU button. BookSense announces, “Alarm settings, pull
down.”
3) Press the UP or DOWN button to move to “power save mode settings, dialog.” Press the
RIGHT, OK, or MENU button. BookSense announces, “Power save mode settings
dialog, power saving time, 5 min combo box.” You can change the power saving time by
pressing the LEFT or RIGHT button to select off, 5, 10, 15, or 20 minutes.
4) Press the OK or MENU button. The default is 5 min.
85