HIMS Inc.
BookSense XT – User Manual
8.5.3. Close
When you have finished recording, press the “OK” button and BookSense announces, “Start
to build”.
When creation of the DAISY package is complete, Booksense announces, “Build end” and
returns you to the mode you were using before you initiated recording.
8.5.4. Insert Mark
You can add up to 20 marks in a DAISY recording so that you can easily access those
locations when playing the recorded DAISY book.
To add a mark while recording, press the number 1 from the position at which you want to
add a mark. BookSense announces, “Mark has been inserted”, and the mark is inserted at
the current position. Note: this message is announced only when you are using headphones.
You can also move to previously entered bookmarks and delete bookmarks in the same
manner as described in the “Bookmarks” section of this manual.
8.5.5. Insert Heading
You can insert an unlimited number of headings. Please note: all headings are at level 1 in
the DAISY hierarchical structure, you cannot create multiple heading levels with the
BookSense DAISY recording feature.
As described above, after BookSense has been recording for 10 seconds from the start of
the recording, it automatically begins recording heading 2. At this time, BookSense
announces, “Start heading 2 recording”.
To insert subsequent headings, press the number 8 each time you wish to start a new
heading. BookSense announces, “Start heading 3 recording”, “Start heading 4 recording”,
etc.
8.5.6. Insert Phrases
You can insert an unlimited number of phrases under a given heading. The first phrase is
automatically identified as the heading’s sub title. If you do not mark any phrases under a
heading, the heading will not have a sub title. In addition, if you mark the beginning of the
first phrase, but do not mark the beginning of a new phrase after recording the sub title, the
sub title will be identified as everything recorded from the beginning of phrase 1 to the next
70
