Chapter IV Function Parameter Table
35
Chapter IV Function Parameter Table
4.1 Function parameter table
Description of symbols in the table:
× - Indicates this parameter cannot be changed during the operation.
○
- Indicates this parameter can be changed during the operation.
● - Indicates the actual test parameter, which cannot be changed.
*
- Indicates this parameter is the reserved parameter of the manufacturer, which is prohibited to be
changed.
Parameter
Code
Parameter
name
Parameter detailed description
Minimum
Unit
Factory
value
Change
F0 group: System management parameters
F0.00
Parameter
operation
protection
0: Password operation. You can view the
function code value without entering a
password, but you cannot change it. You
need to enter the correct password in
F0.05 before changing the function code.
1: Password operation. You cannot view
the function code value when no
password is entered, and the function
code will display “-----”. You need to
enter the correct password in F0.05 before
viewing and changing the function code.
Note: This function will take effect only
after setting the function code
operation password in F0.05.
1
0
○
F0.01
Reserved -
-
-
*
F0.02
Drive
operation
deadline
Set range: 0~Maximum timing 65535h
0 indicates unlimited.
1h
0h
○
F0.03
Parameter
initializati
on
0: No operation
1: Restore the factory settings (the drive
model, running time, and fault records
will not be restored)
2: Clear the fault memory information
(clear fault memory parameters of U1
group)
1
0
×
F0.04
Industry
code
0: Universal drive
1: Special drive for water supply
Note: Changing the industry code will
restore other function codes to their
factory settings.
The factory value of part of function
codes of the special drive for water
supply is restored according to the
following list:
Function
code
Factory
value
F1.01
1
F1.02
8
F8.14
4ms
1
0
×