HIMA HIMax X-SB 01, Руководство пользователя, Страница: 16 / 38

3 Product Description X-SB 01
Page 16 of 38 HI 801 007 E Rev. 4.00
3.4.6 Redundancy Indicators
The LEDs are located below the module status indicators.
LED Color Status Description
On
Caution: Removing an operating system bus
module cause the system to fail!
The SB module is
ƒ running in mono operation (only 1 system bus active)
ƒ configured in SILworX
The module is absolutely required for operating the
HIMax system!
Blinking1
Caution: Removing an operating system bus
module cause the system to fail!
The SB module is inserted and configured for redundant
operation, but the redundant module is not available.
The module is absolutely required for operating the
HIMax system!
Ess Yellow
Off The system bus module is not absolutely required for
operation! Observe the
Red
LED!
On Redundant operation, the SB module is operating
redundantly.
The redundant SB module periodically allocates
identical system/rack IDs
(the adjustment of the system/rack IDs was successful).
Blinking1 Redundancy setting
Red Yellow
Off No redundant operation!
Table 7: Redundancy Indicators
3.4.7 Rack Connection Indicators
The rack connection and slot LEDs are labeled
Sys Bus.
LED Color Status Description
On Physical and logical connection to the system bus module
in another base plate. Green
Blinking1 Transient disturbances on the system bus
On
The modules recognizes additional system bus modules
on the system bus Yellow
Blinking1 Only a physical connection to the system bus module in
another base plate.
Up
Off Off No connection to another system bus module.
On Physical and logical connection to the system bus module
in another base plate. Green
Blinking1 Transient disturbances on the system bus
On
The modules recognizes additional system bus modules
on the system bus Yellow
Blinking1 Only a physical connection to the system bus module in
another base plate.
Down
Off Off No connection to another system bus module.
Table 8: Rack Connection Indicators