HIMA HIMax X-DI 32 02, Руководство пользователя, Страница: 11 / 56

X-DI 32 02 3 Product Description
HI 801 017 E Rev. 4.00 Page 11 of 56
3.3 Type Label
The type label specifies the following important details:
ƒ Product name
ƒ Mark of conformity
ƒ Bar code (2D or 1D code)
ƒ Part number (Part-No.)
ƒ Hardware revision index (HW Rev.)
ƒ Software revision index (SW Rev.)
ƒ Operating voltage (Power)
ƒ Ex specifications (if applicable)
ƒ Production year (Prod-Year:)
Figure 1: Sample Type Label
3.4 Assembly
The module has 32 inputs, each input is measured and functionally tested using two
internal measuring facilities.
Four short-circuit-proof supplies feed eight supply outputs each. One supply output is
assigned to each input.
The 32 inputs can be used to evaluate the values measured for the proximity switches,
safety proximity switches or wired contacts.
The switching thresholds for generating digital signals can be configured in SILworX.
The safety-related 1oo2 processor system for the I/O module controls and monitors the I/O
level. The data and states of the I/O module are made available to the processor modules
via the redundant system bus. The system bus has a redundant structure for reasons of
availability. Redundancy is only ensured if both system bus modules are inserted in the
base plates and configured in SILworX.
The module is equipped with LEDs to indicate the status of the digital inputs,
see Chapter 3.4.2.