HIMA HIMax X-DI 16 01 Скачать руководство пользователя страница 18 | Manualshive

Страница: 18 / 54

HIMA HIMax X-DI 16 01 Скачать руководство пользователя страница 18

3 Product Description

X-DI 16 01

Page 18 of 54

HI 801 057 E Rev. 4.00

3.6 Connector

Boards

A connector board connects the module to the field zone. Module and connector board
form together a functional unit. Insert the connector board into the appropriate slot prior to
mounting the module.

The following connector boards are available for the module:

Connector board Description
X-CB 007 01

Connector board with spring terminals

X-CB 007 02

Redundant connector board with spring terminals

X-CB 007 03

Connector board for system cable set

X-CB 007 04

Redundant connector board for system cable set

Table 10: Available Connector Boards

Connector Boards with Spring Terminals

The connector boards X-CB 007 01 and X-CB 007 02 are delivered with the appropriate
spring terminals.

Connector Boards with no Spring Terminals

The connector boards X-CB 007 03 and X-CB 007 04 are required if system cable set X-CA
004 01 or X-CA 004 02 should be used. Refer to Chapter 3.7 for more information.

Spring terminals to connect to external power supply are delivered with all connector
boards.

3.6.1

Mechanical Coding of Connector Boards

The female connector of the X-CB 007 01/02 connector boards and the I/O module plug of
the module are shifted opposite to any other HIMax modules. This prevents faulty module
assembly.

«
...
16
17
18
19
20
...
»

Содержание HIMax X-DI 16 01























































Отзывы:

Нет отзывов