HIMA HIMatrix F60 DI 32 01, Руководство пользователя

Страница: 25 / 38

DI 32 01 4 Start-Up
HI 800 203 E Rev. 1.00 Page 25 of 38
4.4.3 Digital inputs
System Signal R/W Description
Mod.SRS [UDINT] R Slot number (System Rack Slot)
Mod. Type [UINT] R Type of module,target value: 0xF807 [63495
dec
]
Mod. Error Code
[WORD] R Error codes for the module
Coding Description
0x0000 I/O processing, if required with errors
see other error codes
0x0001 No I/O processing (CPU not in RUN)
0x0002 No I/O processing during the booting test
0x0004 Manufacturer interface operating
0x0010 No I/O processing: wrong configuration
0x0020 No I/O processing: fault rate exceeded
0x0040/
0x0080 No I/O processing: configured module not plugged in
DI.Error Code
[WORD] R Error codes for all digital inputs
Coding Description
0x0001 Module fault
0x0002 FTT test of test pattern faulty
0x0004 FTT test: 1st temperature threshold exceeded
0x0008 FTT test: 2nd Temperature threshold exceeded
DI[xx].Error Code
[BYTE] R Error codes for the digital input channels
Coding Description
0x01 Fault in the analog input module
0x10 Short-circuit of the channel
0x80 Intermittence between pulsed output DO and digital
input DI, e.g.,
ƒ Open-circuit
ƒ Open switch
ƒ L+ low voltage
DI[xx].Value [BOOL] R Input values for the digital input channels
0 = input de-energized
1 = input energized
DI Number of
Pulsed Channels
[USINT] W Number of pulsed outputs (supply outputs)
Coding Description
0 No output planned for LS/LB
1)
detection
1 Output channnel 1 planned for LS/LB
1)
detection
2 Output channels 1...2 planned for LS/LB
1)
detection
... …
8
Output channels 1...8 planned for LS/LB
1)
detection
Pulsed outputs must not be used as safety-related outputs!
DI Pulse.
Slot
[UDINT] W Pulse module slot: Value 1...6, according to the actual slot on the right of
the CPU
DI[xx].Pulsed
Channel [USINT] W Source channel for pulsed supply
Coding Description
0 Input channel
1 Pulse of the 1st DO channel
2 Pulse of the 2nd DO channel
... ...
8
Pulse of the 8th DO channel