HIMA HIMatrix F3 AIO 8/4 01, Руководство пользователя

Страница: 39 / 56

F3 AIO 8/4 01 4 Start-up
HI 800 161 E Rev. 2.00 Page 39 of 56
System signal R/W Description
Transmitter
Voltage[01] [USINT] W Switching of the transmitter supply for each group:
1 = 8.2 V
2 = 26.0 V
Transmitter.
Error Code [WORD] R Error codes for the transmitter unit
Coding Description
0x0001 Fault in the transmitter supply
0x0400 FTT test: 1st temperature threshold exceeded
0x0800 FTT test: 2nd temperature threshold exceeded
Transmitter[01].
Error Code [BYTE]
R Error codes for each transmitter group
Coding Description
0x01 Module fault of transmitter supply
0x02 Overcurrent of transmitter supply
0x04 Undervoltage of transmitter supply.
0x08 Overvoltage of transmitter supply.
AI[xx].Underflow
[BOOL] R Underflow
AI[INT].Value
in accordance with
AI[xx].Limit Value LOW
The validity depends on
AI[xx].Error Code
AI[xx].Overflow
[BOOL]
R
Overflow
AI[INT].Value
in accordance with
AI[xx].Limit Value HIGH
The validity depends on
AI[xx].Error Code
AI[xx].Threshold
LOW
[INT] W Voltage range upper limit for low level
AI[xx].Underflow
AI[xx].Limit Value
HIGH
[INT] W Voltage range low limit for high level
AI[xx].Overflow
Table 33: ELOP II Factory - System Signals for the Analog Inputs