
4 Start-Up
F20
Page 40 of 56
HI 800 143 E Rev. 1.01
4.4
Configuring a Controller Using ELOP II Factory
4.4.1
Configuring the Inputs and Outputs
The signals previously defined in the Signal Editor (Hardware Management) are assigned
to the individual channels (inputs and outputs) using ELOP II Factory. Refer to the System
Manual for Compact Controller or the online help for more details.
The following chapter describes the system signals used for assigning signals in the
controller.
4.4.2
Signals and Error Codes for the Inputs and Output
The following tables specify the signals that can be read and set for the inputs and outputs,
including the corresponding error codes.
In the user program, the error codes can be read using the signals assigned within the
logic.
The error codes can also be displayed in ELOP II Factory.
Содержание HIMatrix F20
Страница 6: ...Table of Contents F20 Page 6 of 56 HI 800 143 E Rev 1 01...
Страница 50: ...9 Disposal F20 Page 50 of 56 HI 800 143 E Rev 1 01...
Страница 55: ......