HIMA HIMatrix F2 DO 16 01, Описание продукта

Страница: 22 / 40

4 Start-Up F2 DO 16 01
Page 22 of 40 HI 800 159 E Rev. 1.01
4 Start-Up
To start up the remote I/O, it must be mounted, connected and configured in the
programming tool.
4.1 Installation and Mounting
The remote I/O is mounted on a 35 mm DIN rail such as described in the HIMatrix System
Manual for Compact Systems.
4.1.1 Connecting the Digital Outputs
Use the following terminals to connect the digital outputs:
Terminal Designation Function (outputs D1, above)
1 L- Ground channel group D1
2 1 Digital output DO 1
3 2 Digital output DO 2
4 3 Digital output DO 3
5 4 Digital output DO 4
6 L- Ground channel group D1
Terminal Designation Function (outputs D1, below)
13 L- Ground channel group D1
14 9 Digital output DO 9
15 10 Digital output DO 10
16 11 Digital output DO 11
17 12 Digital output DO 12
18 L- Ground channel group D1
Terminal Designation Function (outputs D2, above)
7 L- Ground channel group D2
8 5 Digital output DO 5
9 6 Digital output DO 6
10 7 Digital output DO 7
11 8 Digital output DO 8
12 L- Ground channel group D2
Terminal Designation Function (outputs D2, below)
19 L- Ground channel group D2
20 13 Digital output DO 13
21 14 Digital output DO 14
22 15 Digital output DO 15
23 16 Digital output DO 16
24 L- Ground channel group D2
Table 14: Terminal Assignment for the Digital Outputs