HIMA HIMatrix DI 24 01, Руководство пользователя

Страница: 21 / 34

DI 24 01 4 Start-Up
HI 800 201 E Rev. 1.00 Page 21 of 34
4.3.1 Parameters and Error Codes for the Inputs
The following tables specify the system parameters that can be read and set for the inputs,
including the corresponding error codes.
In the user program, the error codes can be read using the variables assigned within the
logic.
The error codes can also be displayed in SILworX.
4.3.2 Digital Inputs
The following tables present the statuses and parameters for the input module in the same
order as given in the Hardware Editor.
4.3.2.1
Module
Tab
The
Module
tab contains the following system parameters.
System parameter Data
type R/W Description
DI.Error Code WORD R Error codes for all digital inputs
Coding Description
0x0001 Module fault
0x0002 FTT test of test pattern faulty
0x0004 FTT test: 1st temperature threshold
exceeded
0x0008 FTT test: 2nd Temperature threshold
exceeded
Module Error Code WORD R Module error code
Coding Description
0x0000 I/O processing, if required with errors
see other error codes
0x0001 No I/O processing (CPU not in RUN)
0x0002 No I/O processing during the booting test
0x0004 Manufacturer interface operating
0x0010 No I/O processing: wrong configuration
0x0020 No I/O processing: fault rate exceeded
0x0040/
0x0080 No I/O processing: configured module not
plugged in
Module SRS UDINT R Slot number (System Rack Slot)
Module Type UINT R Type of module, target value: 0xFD02 [64770
dez
]
Table 11: SILworX - System Parameters for Digital Inputs,
Module
Tab
4.3.2.2 DI 24 01: Channels Tab
System parameter Data
type R/W Description
-> Error Code
[BYTE]
BYTE R Error codes for the digital input channels
Coding Description
0x01 Fault in the analog input module
-> Value [BOOL] BOOL R Input values for the digital input channels
0 = input de-energized
1 = input energized
Table 12: SILworX - System Parameters for Digital Inputs,
DI 24 01: Channels
Tab