HIMA DIO 24/16 01, Руководство пользователя

Страница: 6 / 40

1 Introduction DIO 24/16 01
Page 6 of 40 HI 800 205 E Rev. 1.01
Additionally, the following documents must be taken into account:
Name Content Document number
HIMatrix System Manual
Compact Systems Hardware description of the HIMatrix
compact systems HI 800 141 E
HIMatrix System Manual
Modular System F60 Hardware description of the HIMatrix
modular system HI 800 191 E
Himatrix Safety Manual Safety functions of the HIMatrix
system HI 800 023 E
HIMatrix Engineering
Manual Project planning description for
HIMatrix systems HI 800 101 E
SILworX Online Help Instructions on how to use SILworX -
ELOP II Factory Online
Help Instructions on how to use ELOP II
Factory, Ethernet IP protocol,
INTERBUS protocol -
First Steps
SILworX Introduction to SILworX using the
HIMax system as an example HI 801 103 E
First Steps
ELOP II Factory Introduction to ELOP II Factory HI 800 006 E
Table 2: Additional Relevant Documents
The latest manuals can be downloaded from the HIMA website www.hima.com. The
revision index on the footer can be used to compare the current version of existing manuals
with the Internet edition.
1.2 Target Audience
This document addresses system planners, configuration engineers, programmers of
automation devices and personnel authorized to implement, operate and maintain the
modules and systems. Specialized knowledge of safety-related automation systems is
required.
1.3 Formatting Conventions
To ensure improved readability and comprehensibility, the following fonts are used in this
document:
Bold:
To highlight important parts
Names of buttons, menu functions and tabs that can be clicked and
used in the programming tool.
Italics:
For parameters and system variables
Courier
Literal user inputs
RUN Operating state are designated by capitals
Chapter 1.2.3 Cross references are hyperlinks even though they are not
particularly marked. When the cursor hovers over a hyperlink, it
changes its shape. Click the hyperlink to jump to the corresponding
position.
Safety notes and operating tips are particularly marked.
1.3.1 Safety Notes
The safety notes are represented as described below.
These notes must absolutely be observed to reduce the risk to a minimum. The content is
structured as follows:
ƒ Signal word: danger, warning, caution, notice
ƒ Type and source of danger