Page 4
06/11
Description of features BA 30/800
The banding machine
BA 30/800
by
HIMA
applies paper
bands automatically where the paper is unwinded from a
paper roll. When the paper roll is loaded and the start button
is pressed a band is pulled tight around the product to be
banded, sealed and cut off. When removing the banded pro-
duct, a new loop is formed instantly preparing the machine
for a new work cycle.
Technical specifications
Output:
up to 25 cycles/min.
Width of banded product:
30 - 310 mm
Stack height:
3 - 220 mm
Triggering of cycle:
– manual/start button
– foot actuator
– automatic mode button
Dimensions:
540(L) x 350(W) x 220 (H) mm
Power supply:
230 V ~, 50 Hz, 200 W
Weight:
32 kg
Power supply:
Plug the supplied power cord into the appliance connector at
the back of the machine and connect the other end to a sui-
table power outlet 230 V ~, 16 A.
Caution
!
Make sure the selected power outlet is appropriately
fused (16 A). Otherwise, there is the risk of fire in case of
overload.
The supplied power cord shall be modified (length, plug,
etc.) by authorised specialists only.
HIMA
Harald Hinderer Maschinenbau