Hilti NURON TE 5-22, Руководство пользователя

Страница: 12 / 64

6 English 2351801
*2351801*
3 Description
3.1 Product overview 1
@ Dust cap
;
Locking sleeve
=
Clamping band
%
Connection for dust collection module (DCD)
&
Mount for depth gauge
(
Depth gauge
)
Function selector switch
+
Forward/reverse switch
§ Control switch
/
Electrical interface
Dust removal module (TE DRS-5)
:
Work-area light
∙
Battery release button
$
Battery status indicator
£
Battery
|
Auxiliary handle
¡
Release button, auxiliary handle
Q
Locking pin, dust removal module (TE DRS-
5)
W
Sealing lip
E
Tool holder (SDS)
3.2 Intended use
The product described is a cordless rotary hammer drill. It is designed for drilling in steel, wood and masonry,
for hammer-action drilling in concrete and masonry, and for driving and removing screws. The product can
also be used for light chiseling work on masonry and for surface finishing on concrete.
• For this product, use only
Hilti lithium­ion batteries of the B 22 series. For this product, Hilti recommends
the use of the batteries stated in the table at the end of these operating instructions.
• For these batteries, use only Hilti chargers of the type series listed at the end of these operating
instructions.
3.3 Items supplied
Rotary hammer drill, operating instructions
Other system products approved for use with this product can be found at your local
Hilti Store or at:
www.hilti.group
3.4 Status indicators of the Li­ion battery
Hilti Nuron Li-ion batteries can indicate state of charge, fault messages and the battery's state of health.
3.4.1 Indicators for state of charge and fault messages
WARNING
Risk of injury by a falling battery!
▶ If the release button is pressed with a battery inserted in the product, subsequently check that the battery
is correctly re-engaged and secure.
Short-press the release button of the battery to get whichever of the following status indications is applicable
at the time.
State of charge and, if applicable, faults are indicated constantly as long as the connected product is
switched on.
Status Meaning
Four (4) LEDs show constantly green State of charge: 100 % to 71 %