Hilti NPR 019 IE-A22, Оригинальная инструкция по эксплуатации

Страница: 22 / 232

18 English 2188464
*2188464*
It is designed for crimping fittings used to connect composite, copper (Cu) and steel pipes.
• Use only
Hilti lithium­ion batteries of the B 22 series with this product.
• Use only Hilti -approved battery chargers to charge these batteries. More information is available from
your Hilti Store or from www.hilti.group
3.3 Lithium­ion battery status display
The charge state of the Li-ion battery and malfunctions of the product are indicated by the indicator of the
Li­ion battery. The state of charge of the Li­ion battery is displayed after pressing one of the two battery
release buttons.
Status Meaning
4 LEDs light. State of charge: 75 % to 100 %
3 LEDs light. State of charge: 50 % to 75 %
2 LEDs light. State of charge: 25 % to 50 %
1 LED lights. State of charge: 10 % to 25 %
1 LED flashes. State of charge: < 10 %
Battery state of charge cannot be displayed while the control switch is pressed and for up to 5 seconds
after releasing the control switch. If the LEDs of the charge state indicator flash, follow the instructions
in the 'Troubleshooting' section.
3.4 Items supplied
Crimping / pressing tool, operating instructions.
Other system products approved for use with this product can be found at your local
HILTI STORE or online
at: www.hilti.group
4 Technical data
NPR 019 IE-A22
Rated voltage
21.6 V
Weight in accordance with EPTA Procedure 01 including batteryB22⁄8.0 2.7 kg
Crimping time ≈ 4 s
Max. crimping force 19 kN
Storage temperature −20 ℃ … 70 ℃
Ambient temperature for operation −17 ℃ … 60 ℃
4.1 Noise information and vibration values in accordance with EN 62841
The sound pressure and vibration values given in these instructions were measured in accordance with a
standardized test and can be used to compare one power tool with another. They can also be used for a
preliminary assessment of exposure.
The data given represent the main applications of the power tool. However, if the power tool is used for
different applications, with different accessory tools, or is poorly maintained, the data can vary. This can
significantly increase exposure over the total working period.
An accurate estimation of exposure should also take into account the times when the tool is switched off, or
when it is running but not actually being used for a job. This can significantly reduce exposure over the total
working period.
Identify additional safety measures to protect the operator from the effects of noise and/or vibration, for
example: maintaining the power tool and accessory tools, keeping the hands warm, organization of work
patterns.
Noise values
Sound (power) level (L
WA
) 80 dB(A)
Uncertainty for the sound power level (K
WA
) 2.5 dB(A)
Emission sound pressure level (L
pA
) 70 dB(A)
Uncertainty for the sound pressure level (K
pA
) 2.5 dB(A)