Hilti DST 10-CA, Руководство по эксплуатации

Страница: 20 / 52

16 English 2328079
*2328079*
Protection class in accordance with IEC
60529
IP 65
Frequency 2,400 MHz … 2,483.5 MHz
Maximum emitted transmission power 1.7 dBm
4.2 Saw blade
Permissible saw blade diameter
600 mm … 1,200 mm
Maximum blade diameter for guide cut
800 mm
Maximum cutting depth
530 mm
Arbor hole diameter
60 mm
Maximum saw blade disc thickness 5 mm
4.3 Transport trolley
Maximum load 180 kg
Dimensions (L×W×H) 1,100 mm × 690 mm × 1,180 mm
Weight, loaded 100 kg
Tyre pressure 2.1 bar
4.4 Noise information in accordance with EN 15027
The sound pressure and vibration values given in these instructions have been measured
in accordance with a standardized test and may be used to compare one power tool with
another.
Sound emissions in operation can vary up to 10 dB(A) from the stated measured values,
depending on the type of diamond saw blade used and the operating conditions. Adapt
ear protection and other noise-control measures to the specific operating conditions.
The noise pressure level can be reduced by approx. 10 dB(A) when noise-reducing
(silent) saw blades are used.
DST 10-CA
Sound power level (L
WA
) 114.5 dB(A)
Sound pressure level (L
pA
) 96.9 dB(A)
Sound level uncertainty (K
pA
) (EN 15027) 3 dB(A)
5 Planning
5.1 Cutting sequence
▶
Make dividing cuts to adjust the maximum size and weight of the concrete blocks
to the prevailing conditions (i.e. the lifting capacity of the crane or the maximum
permissible floor loading capacity and size of doors).
A rational cutting sequence can be achieved by appropriate spacing of the track
supports.