hilscher NXHX 90-MC, Описание устройства

Страница: 35 / 83

Accessories 35/83
Pin Signal
1 +24V
2 +24V
3 +12V
4 +12V
5 +3V3
6 GND
7 +3V3
8 GND
9 +3V3
10 GND
Table 43: Pin assignment J7
Pin Signal
1 A’
2 GND
3 B’
4 GND
5 -
6 GND
7 Z’
8 GND
9 -
10 GND
Table 44: Pin assignment J3
Pin Signal
1 DA’
2 GND
3 DB’
4 GND
5 -
6 GND
7 DZ’
8 GND
9 -
10 GND
Table 45: Pin assignment J4
3.5 NXJTAG-USB
This section describes the NXJTAG-USB adapter module (part number
7910.100) that can be mounted on the connector X400 of the NXHX 90-MC
board (for identifying the X400 connector on the board, see position (22) in
section Positions of interfaces and operating elements [
}
page 8]).
The NXHX-JTAG-USB adapter module is equipped with a JTAG ARM20
female connector. To connect the NXHX-JTAG-USB adapter to the
connector
X400 of the NXHX 90-MC board a NXAC-JTAG-MIPI20 adapter
is required (part number 2400.300).
NXHX 90-MC | Device description
DOC200602HW01EN | Revision 1 | English | 2021-02 | Released | Public © Hilscher 2021