Accessories
36/60
NXHX 51-ETM | Development Board
DOC120606HW05EN | Revision 5 | English | 2013-10 | Released | Public
© Hilscher, 2012 - 2013
4.1.7 Accessory
Cables
and
Connectors for Host Interface
4.1.7.1
CAB-NXPCA-PCI
The CAB-NXPCA-PCI cable can be used to connect the X3 host interface
of the NXHX 51-ETM (see
section on page 16) with the
Hilscher NXPCA-PCI Card (see
Parallel Dual-Port Memory at Host
section on page 35) or other host devices.
CAB-NXPCA-PCI
Value
Part number
4400.000
Cable length
45 cm
Connectors
68 pin socket connector
Table 37: Technical Data CAB-NXPCA-PCI
4.1.7.2
CAB-NXEB5
The CAB-NXEB5 cable can be used to connect the X3 host interface of the
NXHX 51-ETM (see
section on page 16) with the
Hilscher NXPCA-PCI Card (see
Parallel Dual-Port Memory at Host
section on page 35) or other host devices.
CAB-NXEB5
Value
Part number
4400.001
Cable length
6.35 cm
Connectors
68 pin socket connector
Table 38: Technical Data CAB-NXEB5
4.1.7.3
CON-NXHIF/M
The CON-NXHIF/M male host interface socket can be used as connector
for PCB in hardware development.
CON-NXHIF/M
Value
Part number
4400.003
Connector
68 pin male socket connector
Table 39: Technical Data CON-NXHIF/M