End-of-line programming
61/70
Select and open interface
Ø
To display a list of the interfaces, enter the following command:
lua5.1.exe cli_flash.lua info
Figure 13: Show interfaces
Ø
Press
Enter
on your keyboard.
Ê
The program tries to detect the connected interfaces. In the end, the
available interface options are listed for selection. The list should
include the interface that you are currently connected with:
Figure 14: Interface options detected by the command line flasher
Ø
Enter the number of the interface you want to use; e.g. if you wanted to
use the JTAG interface from the list in the example shown above, you
would have to enter
4
at the prompt.
netX 90 | Production guide
DOC190101PG03EN | Revision 3 | English | 2019-07 | Released | Public
© Hilscher 2019
