Mounting and dismounting of netHOST device
41/75
6.3
Removing netHOST device from the Top Hat Rail
In order to remove the netHOST from the top hat rail, first remove the
power supply cable and all data cables from the device.
(1)
(2)
(3)
Ø
To release the device from the top hat rail, put a screw driver
to the clip located on the bottom in the middle of the device.
Ø
To disengage the lock from the top hat rail, press the screw
driver upwards.
Ø
You can then easily pull the device off the top hat rail.
Table 32: Removing the netHOST device from Top Hat Rail
netHOST NHST-T100 | LAN controlled master devices
DOC130401UM05EN | Revision 5 | English | 2018-05 | Released | Public
© Hilscher 2013 – 2018
