Local Device Manager
114/136
Managing Timers
On the
Timers
tab, you can display existing timers and create new timer
units. A timer allows you to execute a certain command at a certain time.
Figure 82: Service types: Timers
Ø
Click on a timer in the list to display further information and/or to change
its running state or startup settings.
Ø
To configure a new timer, click
Create Timer
button in the header.
Ê
The
Create Timers
dialog opens:
Figure 83: Create timer dialog
Ø
In the
Command
field, enter the name of the service that shall be
triggered by the timer.
Ø
Set all desired parameters, then click
Save
button.
Note:
Note that you can create but cannot delete timers here. (You can
however stop a timer here by opening its details/settings page, then
clicking the
Stop
button in the
Status
section).
To remove a timer completely, you have to use the
Terminal
to
delete it manually in the corresponding
systemd
configuration.
netFIELD Compact X8M | User manual
DOC220302UM01EN | Revision 1 | English | 2022-05 | Released | Public
© Hilscher 2022
