hilscher CIFX M223090AE Series, Руководство пользователя

Страница: 20 / 55

Installing the hardware 20/55
Important:
Note that the detached network interface Ethernet AIFX-V2-RE
especially is designed for netX 90-based devices and exclusively
works together with them.
In contrast, the detached network interface Ethernet AIFX-RE is
only suitable for netX 100-based devices.
Ø For this purpose, first plug the cable into the cable connector Ethernet
X1 on the AIFX-V2-RE.
Figure 4: Connecting cable to the detached network interface Ethernet (AIFX-V2-RE)
Ø
Then plug the cable into the cable connector Ethernet X801 on the
basic card.
Figure 5: Connect cable to basic card, example CIFX M223090AE
Ø Close the housing of the PC or connecting device again.
4.5 Loading firmware into the device or updating firmware
Ø
Download the firmware file from the Hilscher website and save the file
on the local hard disk of your PC.
Ø Use the Device Explorer software to load the firmware into the device
or update the firmware in your device.
Ø
When downloading the firmware to your device or updating the device
firmware, follow the instructions in the "Device Explorer" operating
instruction manual.
For the "Device Explorer" operating instruction manual, see section
References [ } page 43].
CIFX M223090AE Real-Time Ethernet | Hardware description and installation
DOC190704UM02EN | Revision 2 | English | 2020-06 | Released | Public © Hilscher 2020