Safety
25/223
PC Cards cifX PCI, PCIe, Low Profile PCIe | Installation, Operation and Hardware Description
DOC120204UM46EN | Revision 46 | English | 2015-12 | Relelased | Public
© Hilscher, 2008-2015
2.5.2
Device Destruction by exceeding allowed Signaling Voltage
To avoid device destruction due to high signal voltage to your PC Card cifX,
you must observe the following instructions. These instructions apply to all
PC Cards cifX described in this manual.
•
All I/O signal pins at the PC Card cifX tolerate only the specified
signaling voltage!
•
Operating of your PC Card cifX with a signaling voltage other than the
specified signaling voltage may lead to severe damage to the PC Card
cifX!
The data on the mandatory signaling voltage for the PC Cards cifX
described in this manual you find in the section
on page 34. There the required and permitted signaling voltage
is provided by device type.
2.5.3 Electrostatically
sensitive
Devices
This equipment is sensitive to electrostatic discharge, which cause internal
damage and affect normal operation. Therefore adhere to the necessary
safety precautions for components that are vulnerable with electrostatic
discharge if you install or replace your device. Follow the guidelines listed
hereafter when you handle this equipment:
•
Touch a grounded object to discharge potential static.
•
Wear an approved grounding wriststrap.
•
Do not touch connectors or pins on the PC Card cifX.
•
Do not touch circuit components inside the equipment.
•
If available, use a static-safe workstation.
•
When not in use, store the equipment in appropriate static-safe
packaging.
Reference Safety [S3]
