Operating Instructions
© HILPRESS GmbH Hamburg
GR 09/16
6. The operation completes when the hydraulic pressure
reaches 700 bar or 10,000psi and the safety relief
valve is activated.
7. Press the release bottom to retract the piston.
8. Repeat steps 5-7 to perform the remaining according
to your requirement.
9. Cleaning the tool before storing in the case. Always store
the tool in its case with the cylinder piston fully retracted.
ATTENTION!
Do not put your fingers through the blade of the cutter to remove the cable,
when the battery pack is in place and you are holding the tool with your other
hand. Pay attention! The piston and blade advance quickly and if the trigger is
accidentally pressed it can result in serious damage to your hand. For safety,
remove the battery pack whenever the tool is sitting idly. Do not use this tool
when you are tired or distracted. Keep away from children.
29
