HiLook IK-4142B-MH, Быстрый старт

Страница: 17 / 32

Network Bullet Camera
·
Quick Start Guide
16
2 NVR Installation
2.1
Precautions
During installation of the NVR:

Use brackets for rack mounting.

Ensure ample room for audio and video cables.

When routing cables, ensure that the bend radius of the cables
is no less than five times than its diameter.

Connect the alarm cable.

Allow at least 2cm (≈0.75-inch) of space between racks
mounted devices.

Ensure the NVR is grounded.

Environmental temperature should be within the range of -10
to +55 °C, +14 to +131 °F.

Environmental humidity should be within the range of 10% to
90%.
2.2
Hard Disk Installation
Before you start:

If the NVR has been installed with hard disks, skip this section.

Disconnect the power from the NVR before installing a hard
disk drive (HDD). A factory recommended HDD should be used
for this installation.
Tools Required: Screwdriver.