HiLook DVR-200Q-K1 Series Скачать руководство пользователя страница 85

Страница: 85 / 95

Digital Video Recorder User Manual

Chapter 7 Maintenance

7.1 Restore Default

Steps
1. Click

at the upper-right corner.

2. Select the restoring type.

Simple Restore

Restore all parameters, except the network (including IP address, subnet mask, gateway,
MTU, NIC working mode, default route, server port, etc.) and user account parameters, to the
factory default settings.

Factory Defaults

Restore all parameters to the factory default settings.

Restore to Inactive

Restore the device to the inactive status, and leave all settings unchanged except restoring
user accounts.

3. Click Yes. The device will reboot automatically.

7.2 Search Log

The operation, alarm, exception and information of video recorder can be stored in logs, which
can be viewed and exported at any time.

Steps
1. Click

at the upper-right corner.

2. Click More.
3. Click Log Information.
4. Set the search conditions.
5. Click Search.

7.3 System Service

Steps
1. Click

at the upper-right corner.

2. Click More.
3. Click System Service.

Содержание DVR-200Q-K1 Series
































































































Результаты поиска

Содержание DVR-200Q-K1 Series

Отзывы:

Бренды по названию

Популярные бренды

HiLook DVR-200Q-K1 Series, Руководство пользователя

Результаты поиска

Содержание DVR-200Q-K1 Series

Отзывы:

Бренды по названию

Популярные бренды