Hillstone A200 Series, Справочник по аппаратуре

Страница: 24 / 27

24
Chapter 5 Hardware Maintenance and Replacement
Introduction
This chapter explains startup and shutdown methods of the Hillstone A200-Series device.
Startup
After being connected to the power supply by the power cord for the first time, the device will
automatically start up. If the device is shut down by pressing the power button or using the shutdown
command, and the power cord has not been disconnected after shutdown, you can press the power
button to power on the device. After that, check if the PWR LED on the front panel is on. A solid
green LED indicates correct connection.
Shutdown
If you stop using the equipment, you can do it by the following methods:
The device has no shutdown button, and can directly disconnect AC220V or DC12V for power down.
Chapter 6 Troubleshooting
Introduction
This chapter provides solutions to some common problems of the Hillstone A200-Series device.
Losing the Administrator Password
If you lose the administrator password, please contact your local sales representative or you can reset.
Warning: when the system is reset, all device information will be restored to the factory settings, and the
configuration file will be deleted. Please use it carefully.
Troubleshooting of power supply system