MONTGOMERY DAYBED
1560-010A Side Panels • 1560-010CA Side Panels • 1212-010 White PU Side Panels
1560-020A Back Panel • 1560-020CA Back Panel • 1212-020 White PU Back Panel
*
Trundle Sold Separately
Model #1021-030
Trundle Panel
CARE & MAINTENANCE:
The touch of a soft cloth is all the maintenance the finish will ever need. Please do not use harsh or abrasive cleaners for polishing,
as they may cause damage to the finish. Periodic checks are recommended to make sure that all hardware is securely tightened.
QTY
PART
8
A
10
C
1
E
HARDWARE
QTY
PART
HARDWARE
10
10
B
D
HARDWARE LIST
A
B
C
D
E
(8)
(10)
(10)
(10)
(1)
Wood Screws 30mm
Allen Bolts
1
/
4
”
x 50mm
Flat Washers
1
/
4
”
Spring Washers
1
/
4
”
Allen Wrench
1
/
4
”
PARTS LIST
F
G
H
I
J
(1)
(2)
(1)
(1)
(14)
Back Panel
Side Panels
Front Rail
Rear Rail
Plywood Slats
F
G
F
G
I
I
H
J
G
Date: 07-01-2013
Page 1 of 1
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
A
Examine all packaging material for small parts that may have come loose during shipment. Periodic checks are recommended to insure that all
components are in proper position, tight and free from damage. Keep this assembly instruction for future reference. Adult assembly is required.
The product of Hillsdale Furniture, LLC is designed for residential use only. Customer Service Phone Number: 502-562-0000
G
B
B
B
B
B
B
B
B
B
B
B
B
B
B
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
C
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
D
H BB
B
C
C
D
D
FIGURE 1
FIGURE 2
STEP 1 - See Figure 1
Begin assembly by
attaching the Back Panel
(F) to the back of each
Side Panel (G) by aligning
the holes and securing with
1 Allen Bolt (B), 1 Spring
Washer (D) & 1 Flat
Washer (C) from the
backside per each end. Do
not fully tighten bolts for
this step.
STEP 2 - See Figure 1
Next attach the Rear Rail
(I) to the back of each Side
Panel (G) by aligning the
holes and securing with 2
Allen Bolts (B), 2 Spring
Washers (D) and 2 Flat
Washers (C) per each end.
Do not fully tighten bolts for
this step.
STEP 3 - See Figure 1
Attach the Front Rail (H) to
the inside of each Side Rail in
the front by aligning the holes
and securing with 2 Allen
Bolts (B), 2 Spring Washers
(D) and 2 Flat Washers (C)
per each end. Tighten all bolts
from Steps 1 through 3 using
the Allen Wrench (E) that has
been provided.
STEP 4 - See Figure 2
Insert both ends of each
Plywood Slat (J) onto the
Front and Rear Rails (H & I)
and secure with 8 Wood
Screws (A) with philips head
screwdriver (not included).
The assembly is now
complete.
